These door sweeps are made are made from aluminum and rubber or nylon brushes and seem to work the best and last over time.
The use of shims under the door may help with the alignment when connecting the hinges.
This will reduce the likelihood of ripples forming in the door bottom when it is affixed to the door.Staple-On Door Bottoms or Sweeps: video determine which door bottom is needed.Use just enough to touch both surfaces.They fit into a kerf cut in the bottom of the door.Some older homes have doors that are 1-3/8" up to 2-1/4" thick.The Staple-On, requires removing the door from the frame.Lay door on its edge.Read on for everything you need to know about replacing and installing door sweeps bottoms.Remove the screws on the existing door bottom.If you enjoyed this post, make sure you subscribe to my RSS feed!Most exterior doors are 1-3/4" thick.Position new sweep onto the bottom of the door. Using your heavy duty tin snips or a hack saw cut the door sweep to fit the bottom of the door.The Snap-In, can normally be installed without removing the door.
Readjust the sweep if the door does not function properly.Wood doors are almost always a nail or staple-on type door sweep.Slide-on Door Bottoms or Sweeps: Determine which door bottom is needed.Adjusting the Door Sweep, install the screws in the middle of the oval slot but dont over tighten them.Some wood doors are very heavy.Test the door to ensure that is still opens, closes and locks easily.Remove the existing door bottom; most just slide off.Cut new sweep to length if needed.